Top Fencing Co.Limited
A complete solutions of comprehensive range of wire mesh fencing
Add to Cart
high-security fencing is well known in the world as an anti-climb & anti-cut through a barrier while providing the lowest level of visual impact to the surroundings. With its small mesh aperture, it is effectively finger proof and very difficult to attack by using conventional hand tools. The panels are welded with high-quality carbon steel wires. Designed to give attractive, long-lasting and secure perimeter protection for industrial and commercial properties, public utilities and is also the good choice for electronic alarm and detection systems - no blind spots for CCTV. Military, airports, secure units and prisons.
Panel- Type A(2D view)
| Mesh | Wire Thickness | Surface Treatment | Panel Width | Height | |
| 76.2x12.7mm | Horizontal wire:3.0 ,3.5, 4.0mm Vertical wire: 4.0mm | Galvanized and Electrostatic polyester powder coated or hot dipped galvanized | 2.50m or 2.20m | 1800mm | |
| 2000mm | |||||
| 2100mm | |||||
| 2200mm | |||||
| 2400mm | |||||
| 2500mm | |||||
| 3000mm | |||||
*Weld strength: - 75% of the minimum tensile strength of the wire, Tensile range 540-690 N/m2
| Mesh | Wire Thickness | Surface Treatment | Folds NOS | Panel Width | Height |
| 76.2x12.7mm | Horizontal wire:3.0 ,3.5, 4.0mm Vertical wire: 4.0mm | Galvanized and Electrostatic polyester powder coated or hot dipped galvanized | 3 | 2.50m or 2.20m | 1800mm |
| 3 | 2000mm | ||||
| 4 | 2100mm | ||||
| 4 | 2200mm | ||||
| 4 | 2400mm | ||||
| 5 | 2500mm | ||||
| 6 | 3000mm |
*Weld strength: - 75% of the minimum tensile strength of the wire, Tensile range 540-690 N/m2
| Mesh | Wire Thickness | Surface Treatment | Panel Width | Height |
| 100x15mm | Horizontal wire:3.5mm Vertical wire: 5.5mm | Galvanized and Electrostatic polyester powder coated or hot dipped galvanized | 2.50m or 2.20m | 1800mm |
| 2000mm | ||||
| 2100mm | ||||
| 2200mm | ||||
| 2400mm | ||||
| 2500mm | ||||
| 3000mm |
*With additional horizontal wire of 3.5mm at18cm intervals
*Weld strength: - 75% of the minimum tensile strength of the wire, Tensile range 540-690 N/m2
Post -Type A (RHS Pipe)
| Profile | Wall Thickness | Surface Treatment | Length | Rain hat |
| 80x60mm | 3.00mm | Galvanized and Electrostatic polyester powder coated or hot dipped galvanized | On the basis of panel height | Plastic or Metal |
| Profile | Wall Thickness | Surface Treatment | Length | Rain hat |
| 83x64mm | 3.00mm | Galvanized and Electrostatic polyester powder coated or hot dipped galvanized | On the basis of panel height | Plastic or Metal |
Variations for post
In addition to the standard posts many variations are available to accommodate site requirements:
• alternative sections
• wall fixing plates, cranked posts or base plated
• cranked or straight extensions for barbed or razor wire
• cranked panels
• concrete or wooden posts with through-bolts and fixing plates
